Aluminum wiring installed before the mid-1970s often develops loose connections as temperature swings in Sedgwick County expand and contract the metal. Wichita Pro Electric replaces these runs with copper conductors or installs CO/ALR-rated connectors and copper pigtails where full replacement is not feasible. Each termination is torqued to manufacturer specs and checked with a thermal camera to catch hot spots before they ignite insulation. Homes in College Hill and Eastborough frequently require fishing new wire through plaster walls without disturbing original trim.
The National Electrical Code requires that aluminum terminations use devices rated for the conductor material. We avoid the common mistake of simply swapping breakers or using standard wire nuts, which can create new failure points. In Planeview and Delano properties, we often discover aluminum branch circuits feeding 15- and 20-amp outlets that must be fully re-wired to meet current standards. All work is performed from our base at 2502 S Glendale St during posted hours so homeowners can inspect every junction before walls are closed.
Hot humid summers increase oxidation on aluminum while cold winter nights cause contraction that loosens screws. Tornado season adds the need for secure, vibration-resistant connections. We document every circuit, label panels clearly, and provide a written scope so owners in Riverside or Old Town know exactly what was changed and why.
Aluminum Wire Replacement Service Services We Offer
✓Full Aluminum Wiring Replacement
Complete removal of aluminum branch circuits and installation of copper throughout the home for maximum safety and code compliance.
✓Pigtailing Aluminum Connections
Copper pigtails installed at every outlet, switch and fixture using CO/ALR connectors to eliminate aluminum terminations without rewiring the entire house.
✓Aluminum Wire Inspection and Thermal Scan
Detailed assessment of existing aluminum wiring with infrared imaging to locate overheating connections before failure occurs.
✓Panel and Service Entrance Upgrade
Replacement of aluminum service entrance cable and main panel components rated for aluminum to restore safe power delivery.
✓Kitchen and Bathroom Circuit Rewire
Targeted replacement of aluminum circuits in high-load areas where oxidation and loose connections are most common.
Aluminum Wire Replacement Service Cost in Wichita, KS
| Service | Typical Range | What Affects It |
|---|---|---|
| Pigtailing 20–30 outlets | $1,200–$2,400 | Includes thermal scan and new devices |
| Full branch circuit replacement | $3,500–$7,500 | Varies by square footage and wall access |
| Service entrance cable upgrade | $1,800–$3,200 | Includes new meter base and grounding |
| Kitchen circuit rewire only | $900–$1,600 | Two dedicated 20-amp copper circuits |
Ranges are typical for Wichita, KS and confirmed with an exact written quote before any work starts.
How it works
- 1
Site Assessment
Technician maps every aluminum circuit, checks panel condition and performs thermal imaging while the home is under normal load.
- 2
Scope and Quote
Detailed written plan lists circuits to be replaced or pigtailed, access methods and any drywall repairs required.
- 3
Wire Replacement
New copper conductors are pulled, all junctions torqued to spec and labeled, with temporary power maintained where possible.
- 4
Testing and Documentation
Each circuit is load-tested, infrared scanned again and a final report with photos is provided to the homeowner.
Pricing
Cost depends on home size, number of circuits and access difficulty. Most Wichita projects fall in the ranges below.